Historically, the most common form of glass. It contains three major compounds in varying proportions, but usually silica (about 60-75 percent), soda (12-18 percent), and lime (5-12 percent). Soda-lime glasses are relatively light, and upon heating, they remain plastic and workable over a wide range of temperatures. They lend themselves, therefore, to elaborate manipulative techniques.

A small, heavy object designed to hold down loose papers. The first glass paperweights were made in the early 1840s in Venice and France, and their manufacture spread rapidly to other parts of Europe and the United States. Glass paperweights ceased to be fashionable in the early 20th century, but the craft of making them revived in the 1950s.

The technique of forming objects from rods and tubes of glass that, when heated in a flame, become soft and can be manipulated into the desired shape. Formerly, the source of the flame was an oil or paraffin lamp used in conjunction with foot-powered bellows; today, gas-fueled torches are used.

A collective term for bubbles, metal and glass particles, and other foreign materials that have been added to the glass for decorative effects.

The process of pulling semimolten glass to elongate it. It is used, for example, in the production of canes.

Sodium carbonate. Soda (or alternatively potash) is commonly used as the alkali ingredient of glass. It serves as a flux to reduce the fusion point of the silica when the batch is melted.

The generic name for a wide variety of techniques used to form glass in a mold.

Calcined limestone, which, added to batch in small quantities, gives stability. Before the 17th century, when its beneficial effects became known, lime was introduced fortuitously as an impurity in the raw materials. The addition of insufficient lime can cause crizzling.

The technique of forming an object by inflating a gather or gob of molten glass on the end of a blowpipe. Traditionally and in modern furnace working, the gaffer blows through the tube, slightly inflating the gob, which is then manipulated into the required form by swinging it, rolling it on a marver, or shaping it with tools or in a mold. It is then inflated to the desired size. In flameworking, one end of the glass tube is heated and closed immediately, after which the worker blows into the other end and manipulates the hot glass.

A movement that began in the United States in the 1960s and has spread all over the world. It is characterized by the proliferation of glass artists who are not affiliated with factories, but work with hot glass in their own studios. The emergence of independent glass artists was made possible by Harvey Littleton and Dominick Labino’s development in 1962 of a small furnace and easy-to-melt glass.

A term popularized in the 1960s for unique or limited-edition objects designed and made in a studio rather than a factory, often, but not necessarily, by the same person.