The technique whereby glass is removed from the surface of an object by grinding it with rotating wheels made of stone, wood, and cork. The first stage of the process employs a stone wheel under a continuous stream of water. Later, wheels of fine-grained stone and wood, fed with various abrasives, are used to grind and polish the surface.

The process of reheating a blank until it becomes soft and gradually flows under its own weight over or into a former mold and eventually assumes the shape of the mold. Soda-lime glass becomes soft at about 1110°F (600°C). Slumping is also known as sagging.

(1) The process of founding or melting the batch; (2) heating pieces of glass in a kiln or furnace until they bond (see Casting and Kiln forming); (3) heating enameled glasses until the enamel bonds with the surface of the object.

A form used for shaping and/ or decorating molten glass. Some molds (e.g., dip molds) impart a pattern to the parison, which is then withdrawn, and blown and tooled to the desired shape and size; other molds (sometimes known as full-size molds) are used to give the object its final form, with or without decoration. Dip molds consist of a single part and are usually shaped like beakers. Full-size molds usually have two or more parts and can be opened to extract the object. Nowadays, most molds are made of metal, but stone, wood, plaster, and earthenware molds were used in the past and are still occasionally employed today.

The process of fusing or shaping glass (usually in or over a mold) by heating it in a kiln.

The technique of forming objects from rods and tubes of glass that, when heated in a flame, become soft and can be manipulated into the desired shape. Formerly, the source of the flame was an oil or paraffin lamp used in conjunction with foot-powered bellows; today, gas-fueled torches are used.

An oven used to process a substance by burning, drying, or heating. In contemporary glassworking, kilns are used to fuse enamel and for kiln-forming processes such as slumping.