Corning Museum of Glass

The collective term for the many techniques (such as copper-wheel engraving and cutting) used to alter or decorate glass when it is cold.

The process of removing glass or imparting a matte finish by bombardment with fine grains of sand that are propelled by compressed air.

(1) Several types of glass with newly developed surface textures, shaded colors, or casing, made in the United States from about 1870 and in Europe between about 1880 and 1900; (2) more generally, especially when written “art glass,” any ornamental glassware made since the mid-19th century.

Smoothing the surface of an object when it is cold by holding it against a rotating wheel fed with a fine abrasive such as pumice or cerium oxide. Glass can also be polished with hand-held tools.

A popular term for colorless lead glass, which has a high refractive index and consequently is particularly brilliant. In the United Kingdom, glass described as crystal must contain a defined percentage of lead oxide. Today, the word is often used to describe any fine glass tableware.

The most common form of silica used in making glass. It is collected from the seashore or, preferably, from deposits that have fewer impurities. For most present-day glassmaking, sand must have a low iron content. Before being used in a batch, it is thoroughly washed, heated to remove carbonaceous matter, and screened to obtain uniformly small grains.

The technique whereby glass is removed from the surface of an object by grinding it with rotating wheels made of stone, wood, and cork. The first stage of the process employs a stone wheel under a continuous stream of water. Later, wheels of fine-grained stone and wood, fed with various abrasives, are used to grind and polish the surface.

The technique of forming objects from rods and tubes of glass that, when heated in a flame, become soft and can be manipulated into the desired shape. Formerly, the source of the flame was an oil or paraffin lamp used in conjunction with foot-powered bellows; today, gas-fueled torches are used.

An enclosed structure for the production and application of heat. In glassmaking, furnaces are used for melting the batch, maintaining pots of glass in a molten state, and reheating partly formed objects at the glory hole.

The technique of forming an object by inflating a gather or gob of molten glass on the end of a blowpipe. Traditionally and in modern furnace working, the gaffer blows through the tube, slightly inflating the gob, which is then manipulated into the required form by swinging it, rolling it on a marver, or shaping it with tools or in a mold. It is then inflated to the desired size. In flameworking, one end of the glass tube is heated and closed immediately, after which the worker blows into the other end and manipulates the hot glass.

The generic name for a wide variety of techniques used to form glass in a mold.