This is your resource for exploring various topics in glass: delve deeper with this collection of articles, multimedia, and virtual books all about glass. Content is frequently added to the area, so check back for new items. If you have a topic you'd like to see covered, send us your suggestion. If you have a specific question, Ask a Librarian at our Rakow Research Library.
Roman glassworkers, tirelessly creative and inventive, were fond of folding and manipulating inflated glass in a variety of ways for different purposes. Two of their characteristic structures—both functional and beautiful—are demonstrated.
As if glassblowing wasn't fast enough—it takes under three minutes to make a Roman bottle—cracking-off made the process even faster. This technique was well known by AD 20 or so, and cut the manufacturing time of simple tumblers in half.
Learn about flameworking with Corning Museum of Glass experts. Flameworking is the technique of taking glass rods or tubes and heating them in a concentrated flame until they become soft.
Chunks of glass are placed in a mold, then heated in a kiln until the glass softens and flows downward to gradually fill the mold. Popular with contemporary artists, this method avoids the need for a giant melting furnace filled with molten glass.
Cutting thin sheet glass is almost as easy as it looks in this video clip...but not quite! Curves really are much trickier than straight lines. The process shown would have been completely familiar to medieval window glaziers.
Molten glass can be cast by a method virtually identical to that used for casting metal. Here, molten glass at 2300 degrees Fahrenheit is ladled into a mold made of sand. The process is relatively easy as hot glassworking processes go...but hot!
Artists have proven that glass as a medium for sculpture is virtually without limits. Among hot-working processes, flameworking allows the greatest detail and the smallest scale. Surprisingly though, it can also be used to create sculpture large enough to fill rooms.
A technique unique to glass, air twist requires very high quality material for success. When sparkling lead crystal became common in 18th-century England, the air twist technique spread rapidly.
By about AD 20, Roman workers had discovered that a bubble of molten glass could be lowered into a mold and then further inflated to fill the mold. In this way, the full-size vessel, complete with elaborate decoration, was made almost instantly.
Hot-working processes used to form a glass object—glassblowing for example—must be followed by a very gradual cooling period called annealing. See what happens when an object is not properly annealed and learn why it breaks.