These terms are used inconsistently, especially in the context of contemporary glass. When used as a noun, murrina usually refers to a multicolored element embedded in an object, whereas murrine most often refers to slices of a complex cane.

The technique of forming an object by inflating a gather or gob of molten glass on the end of a blowpipe. Traditionally and in modern furnace working, the gaffer blows through the tube, slightly inflating the gob, which is then manipulated into the required form by swinging it, rolling it on a marver, or shaping it with tools or in a mold. It is then inflated to the desired size. In flameworking, one end of the glass tube is heated and closed immediately, after which the worker blows into the other end and manipulates the hot glass.

The generic name for a wide variety of techniques used to form glass in a mold.

The process of pulling semimolten glass to elongate it. It is used, for example, in the production of canes.

(Noun) A mass of molten glass (sometimes called a gob) collected on the end of a blowpipe, pontil, or gathering iron; (verb) to collect molten glass on the end of a tool.

A thin, monochrome rod, or a composite rod consisting of groups of rods of different colors, which are bundled together and fused to form a polychrome design that is visible when seen in cross section.

A monochrome segment of glass cut from a trail.

A pocket of gas trapped in glass during manufacture. The term is used both for bubbles introduced intentionally (known as air traps or beads) and for unwanted bubbles created during the melting process. Very small bubbles are known as seeds.

The generic term for glass that is manipulated while it is hot.

The technique of forming objects from rods and tubes of glass that, when heated in a flame, become soft and can be manipulated into the desired shape. Formerly, the source of the flame was an oil or paraffin lamp used in conjunction with foot-powered bellows; today, gas-fueled torches are used.

A technique adapted from metalworking. The object to be fashioned in glass is modeled in wax and encased in clay or plaster that is heated. The wax melts and is released through vents or “gates,” also made of wax, which have been attached to the object before heating. The clay or plaster dries and becomes rigid. This then serves as a mold, into which molten or powdered glass is introduced through the gates. If powdered glass is used, the mold is heated in order to fuse the contents. After annealing, the mold is removed from the object, which is then finished by grinding, fire polishing, or acid etching.