Corning Museum of Glass

(Italian, “glass with twists”) A type of blown glass made with canes that have been twisted to form spiral patterns.

(Italian) A type of polychrome cane made by assembling a bundle of rods of different colors, and heating it until it is soft. The bundle is then attached to two pontils and elongated by drawing. At the same time, the bundle is twisted to produce a spiral pattern. Zanfirico, which is a synonym for vetro a retorti, takes its name from the Venetian dealer Antonio Sanquirico, who, in the 1830s, encouraged the revival on Murano of this and other traditional techniques.

(Italian, “glass with twists”) A type of blown glass made with canes that have been twisted to form spiral patterns.

The pontil, or punty, is a solid metal rod that is usually tipped with a wad of hot glass, then applied to the base of a vessel to hold it during manufacture. It often leaves an irregular or ring-shaped scar on the base when removed. This is called the “pontil mark.”

The process of pulling semimolten glass to elongate it. It is used, for example, in the production of canes.

A thin, monochrome rod, or a composite rod consisting of groups of rods of different colors, which are bundled together and fused to form a polychrome design that is visible when seen in cross section.

A monochrome segment of glass cut from a trail.

(German, “gold between glass”) A type of decoration, produced in Bohemia and Austria in the 18th century, in which a design in gold or silver leaf is incorporated between two vessels that fit together precisely. Unlike Hellenistic and Roman gold glass, which is fused, Zwischengoldglas is bonded with cement.

The term applied to several types of Hellenistic and ancient Roman glass objects decorated with designs cut and/or engraved in gold leaf, which is sandwiched between two fused layers of glass. Hellenistic gold glass was made by sandwiching the decoration between two closely fitting cast, ground, and polished vessels, which were then fused. Many Roman gold glasses apparently were made by applying the gold leaf to the surface of an object, reheating it, and inflating a parison against the decorated surface.

(1) The process of founding or melting the batch; (2) heating pieces of glass in a kiln or furnace until they bond (see Casting and Kiln forming); (3) heating enameled glasses until the enamel bonds with the surface of the object.