Mobile Hot Shop Technical Requirements
Technical Requirements
We’ll Bring the Live Demonstrations to You!
Make your next event sizzle! Host a live hot glassmaking demonstration by The Corning Museum of Glass.
Our glassmakers transform molten glass into sparkling objects that will wow any crowd. And our two unique mobile hotshops can be adapted to any space. Conceived of and designed by the Museum’s hot glass experts, these set-ups allow us to bring the unforgettable magic of live, narrated glassblowing demonstrations to your audience.
For more information on booking us for your next event, email hotglassoutreach@cmog.org.
Mobile Hot Shop
The Mobile Hot Shop is a one-of-a-kind mobile glassmaking studio, perfect for large events and venues. Visually spectacular, it provides an impressive impact for your visitors. At 28 feet long and 35,000 pounds, this semi-trailer transforms into a fully functioning glassmaking studio on wheels.
| Hot Glass Roadshow | |
| Gas requirement | Propane; 75 gallons per day from minimum 500 gal tank -or- Natural Gas; 1" line, 2lbs pressure at connection |
| Electrical requirement | One 200 amp, 208 or 240 volt circuit |
| Studio footprint | 48’ wide, 16' deep |
| Viewing area | An additional space of approximately 50’ x 50’ is suggested to accommodate the audience |
| Other considerations | Seating for the audience is recommended. Bleachers or chairs work equally well Weather protection is also recommended for the audience. A 20’ x 30’ tent with 10’ eves is the minimum. |
| Equipment provided | 300 lb. melt furnace 18" reheating furnace One 24 cu.ft. annealer Pipe warmer, benches & all necessary glassworking equipment and supplies Full sound system for narration and music Complete set of LED theatrical lighting for evening events |
UltraLight Hotshop
The UltraLight Hotshop is made up of a versatile set of highly efficient and portable glassmaking equipment that can fit in even the smallest venue. Don’t let the size fool you though! This hotshop is just the right size to offer spectacular demonstrations. Energy and space efficiency means set-up and utility requirements are minimal. Layout is flexible and can be configured to fit the space and glassmaking needs of your venue.
| Ultra Light Hot Shop | |
| Gas requirement | Propane; 50 gallons / 200 lbs per day -or- Natural Gas; 1" line, 2lbs pressure at connection |
| Electrical requirement | Two 20 amp, 120 volt circuits -and- two 30 amp, 240 volt circuits |
| Studio footprint | 24' wide, 16' deep |
| Viewing area | An additional space of approximately 30’ x 30’ is suggested to accommodate the audience |
| Other considerations | Weather protection is also recommended for the audience. A 20’ x 30’ tent with 8’ eves is the minimum. |
| Equipment provided | 80 lb. melt furnace 13" reheating furnace Two 10 cu.ft. annealers Pipe warmer, benches & all support equipment Aluminium decking & protective glass |
See us in action! Check out the Roadshow's schedule.
To enquire about hosting The Corning Museum Hot Glass Roadshow team at your venue, email hotglassoutreach@cmog.org.
Learn more about Hot Glass on the Road
